Home Page - Brico Oil Tools
Safety
Brico Products
Service & Training
Machining
Rentals
Quality
Career Opportunities
Contacting Brico Oil Tools
 

#5 Setting Tool

BRICO Oil Tools provides a dependable line of Wireline Pressure Setting Tools for the Wireline industry worldwide. Our engineering, high quality and service provides a cost effective alternative.

BT#5 Introduction

The BT#05 Setting Tool Assembly is devised for setting of equipment, mainly bridge plugs, in the well bore tubular on electric Wireline. Products of combustion are utilized for the gradual development of force through pressure thus hydraulic force is transferred through the tool, through the Wireline Adapter Kit to a miniature packer, tubular bridge plugs, tubular cement retainers or tubular frac plugs to fully set the slips and pack off the sealing element of these products. This motive force operates the various working parts of the BT#05 Setting Tool in a proper sequence to ensure a force in excess of 10,000 lbs. / 4,448 daN of force. Tool Force output is a function of well conditions and characteristics of the device being set in tubular products. Do not exceed a shear value of 10,000 lbs. / 4,448 daN of force.

The tool may be used for multiple tasks on highly deviated well bores via a well bore tractor, e-coil and can incorporate a casing collar locator for depth correlation. A wide range of firing head adapters and Wireline accessories are available from BRICO Oil Tools.

The high pressure required within the tool is built up through the burning of a Slow Set Power Charge, or a Standard Power Charge. For specifics on all Power Charges and Igniters refer to BRICO Tech Info on Power Charges and Igniters Manuals. The setting pressure is confined to the proper area of the setting tool through the use of o-ring seals or chevron seals on the high temperature tool. It is of extreme importance that all of these o-rings and seals be maintained in perfect condition and all tool internals are completely cleaned prior to assembly.

The BT#05 Setting Tool Assembly incorporates a Disk Bleeder Valve to provide a safe, easy method of bleeding off trapped pressure from inside the tool after it has been run and before being backloaded for transport. The tool should be bled off once the tool has been pulled from the well bore. This tool should never be transported without the tool pressure released or bled off.

Pressure Features / Benefits at Setting Depth

  • Use to set Tubular Bridge Plugs, Cement Retainers, and minature Production Packers on Electric Wireline.
  • Use in conjunction with a Casing Collar Locator for correlation of exact setting depth.
  • Uses the advantage of the fast running capability of Wireline.
  • Proven design has been the “Industry Standard”.
  • BT#5 size tool for setting equipment inside 2 3/8 / 60.3 mm tubing up to the 3 1/2 inch / 88.9 mm casing.

Setting Tool Manual



For full details and assembly please contact a Brico representative.

....


K
Home Page | Safety | Products | Service | Quality | Career Opportunities | Contact Info
Website by EDGE Marketing & Design Inc.

Click here to Email Brico Oil Tools